Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!ccicpg!felix!zemon
From: jeff@uhccux.UUCP (Jeffrey Blomberg)
Newsgroups: comp.unix.ultrix
Subject: Re: ultrix 1.2 and rje software
Message-ID: <10289@felix.UUCP>
Date: Fri, 23-Oct-87 14:03:18 EST
Article-I.D.: felix.10289
Posted: Fri Oct 23 14:03:18 1987
Date-Received: Mon, 26-Oct-87 01:01:12 EST
References: <9563@felix.UUCP>
Sender: zemon@felix.UUCP
Organization: University of Hawaii
Lines: 14
Approved: zemon@felix.UUCP

Reply-Path:


In article <9563@felix.UUCP> ret@ptsfa.UUCP writes:
>I have been talking with DEC about a remote job entry (RJE) software
>package to run on a ULTRIX 1.2 operating system.  They are not sure
>that there is such an animal and are investigting.

	We have installed a product called COMBOARD from Software Results.
	The product consists of one board (plugs into a UNIBUS backplane)
	and several programs including a driver that must be installed into
	the Ultrix kernel.  It has worked quite well on our 8650 with Ultrix
	1.2. Not sure how easily it will port to 2.0.  I might also mention
	that it is connected to our IBM3081 via a 9600baud synchronous link
	using BSC/HASP protocol.

	Software Results 1-800-SRC-DATA.