Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!mnetor!uunet!ukma!nrl-cmf!ames!ucbcad!ucbvax!CRNLNS.BITNET!SEB From: SEB@CRNLNS.BITNET Newsgroups: comp.laser-printers Subject: re: LW fuser problems? Message-ID: <8711242115.AA22987@brillig.umd.edu> Date: Mon, 16-Nov-87 15:11:00 EST Article-I.D.: brillig.8711242115.AA22987 Posted: Mon Nov 16 15:11:00 1987 Date-Received: Sat, 28-Nov-87 11:08:45 EST Sender: daemon@ucbvax.BERKELEY.EDU Organization: The ARPA Internet Lines: 40 Approved: laser-lovers@brillig.umd.edu David Anderson recently posted to laser-lovers: >A recent issue of MacTutor reported that some (heavily used?) >LaserWriters have been seen to have fuser roller damage caused by >constant contact with the rubber guides above the roller. They said >that there is no known fix for this problem, short of rebuilding the >engine. Does anyone know more about the potential for trouble here? "Rebuilding" is a bit exaggerated. You only need to replace the fuser roller, which can be done by anybody with some mechanical aptitude, the Canon laserprinter hardware manual and a new fuser roller. We've done it several times. We actually have a Talaris 800 Laser Printer, which uses the same Cannon Print Engine as an Apple LaserWriter, slightly modified by Quality Micro Systems for use with their own external graphics controller. Talaris puts their own Font ROMs in the QMS controller. We ordered the following items in June 1986 from Talaris: M115 Maintenance Information Manual $75 M108 Service Data/Parts Manual $38 We ordered the following items in June 1987 from Talaris: Roller, Upper Fixing, RA1-0697-000 $35.10 Claw, Separation, FA2-5938-000 (4ea @1.50) 6.00 Talaris Systems can be reached at PO Box 261580 San Diego, CA 92126 I hope this helps. Selden E. Ball, Jr. Cornell University NYNEX: +1-607-255-0688 Laboratory of Nuclear Studies BITNET: SEB@CRNLNS Wilson Synchrotron Lab ARPA: SEB%CRNLNS.BITNET@WISCVM.WISC.EDU Judd Falls & Dryden Road HEPnet/SPAN: Ithaca, NY, USA 14853 LNS61::SEB = 44283::SEB (node 43.251)