Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!rutgers!princeton!udel!mmdf
From: Dickson@his-phoenix-multics.arpa (Paul Dickson)
Newsgroups: comp.os.minix
Subject: Re: turbo c development
Message-ID: <723@louie.udel.EDU>
Date: Tue, 17-Nov-87 22:16:35 EST
Article-I.D.: louie.723
Posted: Tue Nov 17 22:16:35 1987
Date-Received: Fri, 20-Nov-87 06:01:06 EST
Sender: mmdf@udel.EDU
Lines: 13

This might be totally irrelevant to the problem of Turbo C hanging your
systems, but do the PCs and ATs that are being used have printers
connected? I say this becuase we've experienced a lot of problems with
microemacs (compiled with Turbo C) because output is sometimes being
routed to the printer. And with no printer connected, we get a
mysterious hang. We discovered this by leaving the printer on while
running make.

BTW - I use TCC on my non-PC compatible with no troubles.

          Paul Dickson
            Dickson%pco @ BCO-Multics.ARPA
            Phoenix, Az