Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!ukma!nrl-cmf!ames!ucbcad!ucbvax!CS.UTAH.EDU!cetron
From: cetron@CS.UTAH.EDU (Edward J Cetron)
Newsgroups: comp.os.vms
Subject: Re: help with VS-11 terminals
Message-ID: <8711131636.AA16251@cs.utah.edu>
Date: Fri, 13-Nov-87 11:36:07 EST
Article-I.D.: cs.8711131636.AA16251
Posted: Fri Nov 13 11:36:07 1987
Date-Received: Tue, 17-Nov-87 03:22:32 EST
References: <8711130359.AA13856@ucbvax.Berkeley.EDU>
Sender: daemon@ucbvax.BERKELEY.EDU
Reply-To: cs.utah.edu!cetron@cs.utah.edu (Edward J Cetron)
Organization: Center for Engineering Design, Univ of Utah
Lines: 13


	ah yes, the vs-11..... the only time digital ever produced
a real unibus to qbus convertor....I have one it my 11/44 and it is
wonderful to explain to field service how I am having problems with the
qbus in my 11/44 - and have them say that they only support dec equipment,
and then explain to them that it IS dec equipment.

	but I digress.... simply match the coax with the same type (be very
careful about the impedance it thought it was 75 ohms) and it will work out
to about 70-80 feet (at least it did for us)

-ed
cetron@cs.utah.edu