Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!uwvax!oddjob!hao!boulder!sunybcs!rutgers!clyde!cbosgd!osu-cis!osupyr!artsvax!mike
From: mike@artsvax.UUCP (Michael Czeiszperger)
Newsgroups: comp.periphs
Subject: Re: scsi info request
Message-ID: <199@artsvax.UUCP>
Date: Wed, 18-Nov-87 14:50:14 EST
Article-I.D.: artsvax.199
Posted: Wed Nov 18 14:50:14 1987
Date-Received: Sat, 21-Nov-87 12:50:40 EST
References: <113@abvax.UUCP> <178@vertigo.UUCP>
Organization: OSU College of the Arts Computer Lab
Lines: 27
Keywords: tutorial scsi?

In article <178@vertigo.UUCP> rusty@vertigo.UUCP (91341-M.W.HADDOCK) writes:
>In article <113@abvax.UUCP> jjk@abvax.UUCP (John J. Kolber) writes:
>>
>> HELP!!  I need to become a scsi expert fast!!
>>
The 'official' SCSI standard can be obtained from:
	American National Standards Institute
	1430 Broadway
	New York, NY 10018

>	Check out BYTE within the last year, I believe, Steve Ciarcia
>discussed/built a SCSI controller.  My BYTEs are still boxed up so
>I can't give you the issue.  That's about all that comes to mind
>at this late hour.
>
While the article was helpful, the product he sells to do SCSI development,
the SB180 board, has a small error.  Byte by Byte data transfer works fine,
but DMA will not.  


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Michael S. Czeiszperger      | Disclaimer: "Sorry, I'm all out of pith" 
  Systems Programmer I	      | Smail: Room 406 Baker      (614)
   College of the Arts        |        1971 Neil Avenue      292-
     Computer Lab             |        Columbus, OH 43210     0895
The Ohio State University     | UUCP: {decvax,ucbvax}!cbosgd!osupyr!artsvax!mike
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~