Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!mnetor!uunet!husc6!bloom-beacon!gatech!udel!rochester!ritcv!ptp6186 From: ptp6186@ritcv.UUCP (Paul T. Pryor) Newsgroups: comp.sys.amiga Subject: Re: CBM and upgrade paths Message-ID: <777@ritcv.UUCP> Date: Tue, 10-Nov-87 14:58:55 EST Article-I.D.: ritcv.777 Posted: Tue Nov 10 14:58:55 1987 Date-Received: Thu, 12-Nov-87 23:18:16 EST References: <8711040542.AA29099@violet.berkeley.edu> <2696@cbmvax.UUCP> <21704@ucbvax.BERKELEY.EDU> Reply-To: ptp6186@ritcv.UUCP (Paul T. Pryor) Organization: Rochester Institute of Technology, Rochester, NY Lines: 38 In article <21704@ucbvax.BERKELEY.EDU> bryce@hoser.berkeley.edu (Bryce Nesbitt) writes: >In article <2696@cbmvax.UUCP> andy@cbmvax.UUCP (Andy Finkel) writes: >> >>Now, here's the interesting part... >> ... deleted ... > >*** In light of recent net activities, I feel the need for a >disclaimer: this is not a flame! *** > sure glad it isn't a flame ! :-) > ... deleted ... > >The A501's real time clock cannot be easily calibrated. The >case is soldered shut and there is no access hole to the >trimmer capacitor. Agreed. Now, it is a simple matter of drilling a hole in the cover. The bad new is that in order to twiddle the trimmer cap, it is necessary to remove the A501 from the A500. The other alternative is to remove the top case, and about once a week, twiddle the clock (first moving the keyboard out of the way). When the clock is back to specs, put the top case back on. This would kill the warranty for both the A500 and the A501 :-(. > ... deleted ... > >|\ /| . Ack! (NAK, SOH, EOT) >{o O} . bryce@hoser.berkeley.EDU -or- ucbvax!hoser!bryce > (") > U *------------------------------------------------------------------------------* | UUCP: {allegra,seismo}!rochester!ritcv!ptp6186 | | ARPANET: ptp6186%rit@csnet-relay | | BITNET: ptp6186@ritvax.bitnet | *------------------------------------------------------------------------------*