Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!hao!boulder!sunybcs!rutgers!topaz.rutgers.edu!lachac
From: lachac@topaz.rutgers.edu (Gerard Lachac)
Newsgroups: comp.sys.amiga
Subject: Re: Many subjects...
Message-ID: <16427@topaz.rutgers.edu>
Date: Wed, 11-Nov-87 19:14:20 EST
Article-I.D.: topaz.16427
Posted: Wed Nov 11 19:14:20 1987
Date-Received: Sat, 14-Nov-87 04:37:35 EST
References: <6463@sunybcs.UUCP>
Reply-To: lachac@topaz.rutgers.edu (Gerard Lachac)
Organization: Rutgers Univ., New Brunswick, N.J.
Lines: 32

In article <6463@sunybcs.UUCP> ugpete@sunybcs.UUCP (Peter Theobald) writes:

>2)	When I run two programs (specifically VT100 and DirMaster) that
>	each open their own screens, once I look at VT100, I can't get
>	back to the DirMaster screen! The VT100 window takes up the full
>	screen and cannot be re-sized, so I cannot reach the Front/Back
>	gadgets. The A-N A-M will only switch me from Workbench to VT100.

This is a lot easier then it sounds.  Use the A-N A-M to get to the 
Workbench screen, and then use the Workbench's forward and back gadgets to
get to the Dirmaster screen.



>5)	Is there a way to read MS-Dos 3 1/2" disks on a standard Amiga
>	drive? Maybe with the PCtools, or Dos-to-Dos, Disk-to-disk etc...
>	These are the disks used on a Data General, or IBM convertable.
>	I don't care if I can run anything from MSDOS, I just want to
>	transfer data files. (A NULL modem is impractical for my purposes)

There is a utility for doing just this on the Extras disk that came with
your computer... (if you got 1.2)





-- 
		"Truth is false and logic lost..."
					- Neil Peart
	(who at the time didn't realize he was talking about RU)
lachac@topaz.rutgers.edu <--------OR--------> {seismo|ames}!rutgers!topaz!lachac