Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!ccicpg!harald
From: harald@ccicpg.UUCP ( Harald Milne)
Newsgroups: comp.sys.amiga
Subject: Mitsubishi monitors
Message-ID: <4817@ccicpg.UUCP>
Date: Fri, 13-Nov-87 06:58:36 EST
Article-I.D.: ccicpg.4817
Posted: Fri Nov 13 06:58:36 1987
Date-Received: Sun, 15-Nov-87 07:05:41 EST
Organization: CCI CPD, Irvine CA
Lines: 30
Keywords: monitors, video


	This is not a "flame"

	It's just a question

	I just got the monitor. I hooked it up. Thanks to some kind soul, on
the net, I found out why it would fail.

	This doesn't look nice. For some reason, this monitor hangs the A500
(from other user reports) and my A2000. For some reason, the H-SYNC needs to
be buffered through a TTL driver. (like a 74F00). 

	The symptoms of this failure:

		1) The machine won't boot.
		2) If you leave the connector off, the machine will boot,
		   reconnect the monitor, after boot, all is fine.

	When the machine "hangs", I believe it hangs in the "Fat" Agnus
test. (Color codes). What's really funny about this, is the Amiga only hangs
during "testing of hardware" type of operation. Like warm boot. (Or cold)
	
	Can anybody shed light on this? CBM? CATS?

	Is this monitor a piece of execrement?

-- 
Work: Computer Consoles Inc. (CCI), Advanced Development Group (ADG)
      Irvine, CA (RISCy business! Home of the CCI POWER 6/32)
UUCP: uunet!ccicpg!harald