Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!cmcl2!nrl-cmf!ames!sdcsvax!ucsdhub!hp-sdd!hplabs!hp-pcd!hpcvc0!hpcvcd!charles
From: charles@hpcvcd.HP (Charles Brown)
Newsgroups: comp.sys.amiga
Subject: Re: CBM Changing CPU SLOT
Message-ID: <4410015@hpcvcd.HP>
Date: Thu, 19-Nov-87 14:00:09 EST
Article-I.D.: hpcvcd.4410015
Posted: Thu Nov 19 14:00:09 1987
Date-Received: Sun, 22-Nov-87 15:00:17 EST
References: <1659@netsys.UUCP>
Organization: Hewlett-Packard Co., Corvallis, Oregon
Lines: 10

>... our 68020 board currently works just fine on Rev 4.2 boards,
>Rev 3.9 boards, and German A2000s.  I haven't tried it, but I bet it would
>work on the (unreleased) Rev 2.0 board as well.
>Dave Haynie     Commodore-Amiga    Usenet: {ihnp4|caip|rutgers}!cbmvax!daveh

From this it sounds like your 68020 board should also work fine in
ASDG's 2000&1 box.  Can you (or Perry) confirm this?

Your 68020 board sounds like a good product.  Thank you.
	Charles Brown	hplabs!hp-pcd!charles