Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!cbmvax!daveh
From: daveh@cbmvax.UUCP
Newsgroups: comp.sys.amiga
Subject: Re: CBM Changing CPU SLOT
Message-ID: <2843@cbmvax.UUCP>
Date: Mon, 23-Nov-87 14:16:55 EST
Article-I.D.: cbmvax.2843
Posted: Mon Nov 23 14:16:55 1987
Date-Received: Thu, 26-Nov-87 04:29:14 EST
References: <4410015@hpcvcd.HP>
Organization: Commodore Technology, West Chester, PA
Lines: 16

in article <4410015@hpcvcd.HP>, charles@hpcvcd.HP (Charles Brown) says:
> 
> From this it sounds like your 68020 board should also work fine in
> ASDG's 2000&1 box.  Can you (or Perry) confirm this?

I'd sure expect it to, but I don't have an ASDG 2000-and-1 box yet, and Perry
doesn't have a 68020 board yet.  To use it, you'd remove the 68000 from your
A1000, set the 68020 board to the "A2000" position, and zoom, I suspect.  
Since an A1000 with 2000-and-1 box should appear electrically identical to the
German A2000 (at least timing-wise), I don't expect any problems.

> 	Charles Brown	hplabs!hp-pcd!charles
-- 
Dave Haynie     Commodore-Amiga    Usenet: {ihnp4|caip|rutgers}!cbmvax!daveh
   "The B2000 Guy"              PLINK : D-DAVE H             BIX   : hazy
		"I can't relax, 'cause I'm a Boinger!"