Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!sundc!pitstop!sun!amdcad!ames!hc!beta!cmcl2!rutgers!iuvax!ndmath!nj
From: nj@ndmath.UUCP (Narciso Jaramillo)
Newsgroups: comp.sys.amiga
Subject: Re: Lattice 3.03 - 4.0 Upgrade policy
Message-ID: <458@ndmath.UUCP>
Date: Thu, 5-Nov-87 00:59:18 EST
Article-I.D.: ndmath.458
Posted: Thu Nov  5 00:59:18 1987
Date-Received: Sun, 8-Nov-87 01:08:03 EST
References: <1494@ssc-vax.UUCP>
Organization: Math. Dept., Univ. of Notre Dame
Lines: 31
Keywords: Lattice, C, programming
Summary: Call Lattice's Upgrade Service line.


For any questions about Lattice C upgrades, try their upgrade service
number: (312) 916-1600 (ask for "Upgrade Service").

Or try the Lattice BBS ((312) 916-1200) which has information on the
upgrade.  3.03 or earlier -> 4.0 is $75; 3.10 -> 4.0 is $45.  If you
are a registered 3.03 owner (and didn't buy from Commodore--more about
that later), you should have gotten an upgrade card in the mail.  If
you didn't get the card, or you bought it from Commodore (you can tell
if you bought it from Commodore because the disk is the standard stylized
checkmark with "Amiga C" on the front), you have to send in the disk itself
or a photocopy of its label along with the check.

The address is Lattice Upgrade Services
               P.O. Box 3072
               Glen Ellyn, IL  60138

Oh, by the way, I am not even remotely connected with Lattice.  I'm just
passing this stuff along; I got the info from one call to the -1600 line
and one call to the -1200 BBS (which, by the way, runs at 8N1, 300-9600
baud).  I'm almost certain the information is exactly correct.  I haven't
sent in my upgrade request yet.

To play it safe, you should call the -1600 line, but if you trust my
memory and you don't want to waste the long distance call, go with the
above.  :-)

nj

-- 
nj: ...!ihnp4!iuvax!ndmath!nj, ...!ucbvax!mica!nj