Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!bbn!uwmcsd1!lakesys!gryphon!cadovax!kaz
From: kaz@cadovax.UUCP (Kerry Zimmerman)
Newsgroups: comp.sys.amiga
Subject: Re: shell problem with A2000
Message-ID: <1852@cadovax.UUCP>
Date: Sun, 8-Nov-87 19:55:35 EST
Article-I.D.: cadovax.1852
Posted: Sun Nov  8 19:55:35 1987
Date-Received: Wed, 11-Nov-87 04:45:55 EST
References: <8711061655.AA29654@decwrl.dec.com>
Reply-To: kaz@cadovax.UUCP (Kerry Zimmerman)
Organization: Contel Business Systems, Torrance, CA
Lines: 28

In article <8711061655.AA29654@decwrl.dec.com> zabot@cesare.dec.com (Adv.Tech.Mgr-ACT Torino) writes:
>
>	Re: Kerry Zimmerman problem.
>
>	I have the same configuration and it works fine.
>	The problem may be :
>	a) your h/w is faulty
>	b) you have rewritten your startup-sequence and have
>	   omitted the delay after DJMOUNT.
>	I had some problem with the standard startup-sequence which
>	has a WAIT 25. Increased that to WAIT 35 I had no further problem.
>	I'm using:
>	Shell2.07m / Bridge card, 2MB and Western digital Hard disk.
>	marco

Correct me if I'm mistaken, but isn't DJMOUNT only if you are using a hard
drive on the MS-DOS side of the machine?  My configuration has the
harddisk on the AmigaDos side.  I don't use DJMOUNT, I use binddrivers and
the hd.device provided by Commodore.

Andy recently posted that the problem I found is known, and can be fixed
by getting a new copy of the hd.device.  When I get my copy I will post a
note telling everyone if the problem is fixed.

Kerry Zimmerman
#  {ucbvax,decvax}!trwrb!cadovax!kaz  Contel Business Systems 213-323-8170
A difference between an amateur and a professional, 
is that a professional has the right tools.