Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!hi-csc!giebelhaus
From: giebelhaus@hi-csc.UUCP (Timothy R. Giebelhaus)
Newsgroups: comp.sys.apollo
Subject: telebit modem on apollos
Message-ID: <38802988.4580@hi-csc.UUCP>
Date: Sun, 15-Nov-87 20:41:00 EST
Article-I.D.: hi-csc.38802988.4580
Posted: Sun Nov 15 20:41:00 1987
Date-Received: Tue, 17-Nov-87 01:31:00 EST
Organization: Honeywell CSDD, Golden Valley, MN
Lines: 17
Keywords: telebit modem uucp

I have got a telebit modem for my DN4000.  I have read the instructions
and am wondering what to do about flow control.  Something tells me
that xon/xoff won't be a good idea with compressed uucp data.  I would
like to use cts/rts.  I assume that I would do this with the tctl 
switches cts_enable and rts_enable.  

Has anyone used cts/rts flow control on the Apollos before?
Has anyone used the telebit modems on the Apollos before?

My plan so far is to connect the telebit at 9600 baud and use flow
control if the modem can't connect to another modem which will allow
the higher baud rates.
-- 
---------------------------------
UUCP: {uunet, ihnp4!umn-cs}!hi-csc!giebelhaus
ARPA: hi-csc!giebelhaus@umn-cs.arpa
Nobody I know admits to sharing my opinions.  I don't even have a pet.