Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!sri-spam!ames!ucbcad!ucbvax!UNO.BITNET!SJDMK
From: SJDMK@UNO.BITNET.UUCP
Newsgroups: comp.sys.apple
Subject: Kermit v3.79 and Call waiting...
Message-ID: <8711111830.aa04641@SMOKE.BRL.ARPA>
Date: Wed, 11-Nov-87 18:20:00 EST
Article-I.D.: SMOKE.8711111830.aa04641
Posted: Wed Nov 11 18:20:00 1987
Date-Received: Sat, 14-Nov-87 16:40:51 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The ARPA Internet
Lines: 19

I want to write my KERMIT.MODEM file with the code to turn off call waiting
in the numbers. Is this possible? I tried but it didn't work. It does work
if you issue the CONNECT command and then send the code directly to the
modem.

A sample of what I want to do follows ("*70" turns off call waiting and ","
causes the modem to delay 1 second (neither the star nor the comma are sent
to the modem)):

ATDT*70,1234567

Does this work for anyone else?

Thanks,

                             Steve

BITnet:   SJDMK@UNO
ARPAnet:  EDU%"SJDMK%UNO.BITNET@WISCVM.WISC.EDU"