Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!cmcl2!nrl-cmf!ames!ucbcad!ucbvax!WPI.BITNET!TMURPHY
From: TMURPHY@WPI.BITNET
Newsgroups: comp.sys.apple
Subject: APPLE IIGS SPEAKER OUTPUT
Message-ID: <8711170209.AA02996@wpi>
Date: Mon, 16-Nov-87 21:09:36 EST
Article-I.D.: wpi.8711170209.AA02996
Posted: Mon Nov 16 21:09:36 1987
Date-Received: Fri, 20-Nov-87 04:07:22 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The ARPA Internet
Lines: 11


The problem with recording is probably the impedance of the outputs/inputs
used.  I don't know what the GS has, but if it's a speaker connection it's
probably 8 ohms, while a microphone input would be a few thousand ohms.
In other words, they don't like each other.  A standard audio input (line
level) should work, otherwise try a phono level input.

Chris Murphy
Worcester Polytechnic Institute
Bitnet:  TMURPHY@WPI
Arpanet: tmurphy%wpi.bitnet@talcott.harvard.edu