Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!bbn!rochester!rutgers!iuvax!bsu-cs!mithomas
From: mithomas@bsu-cs.UUCP (Michael Thomas Niehaus)
Newsgroups: comp.sys.apple
Subject: Apple IIe and KERMIT 3.79 with a Super Serial Card
Message-ID: <1551@bsu-cs.UUCP>
Date: Fri, 20-Nov-87 11:31:06 EST
Article-I.D.: bsu-cs.1551
Posted: Fri Nov 20 11:31:06 1987
Date-Received: Sun, 22-Nov-87 14:43:29 EST
Organization: CS Dept, Ball St U, Muncie, Indiana
Lines: 15

Does anyone know what settings are needed for KERMIT 3.79 on an Apple
IIe and the Super Serial Card?  I have the card working in straight terminal
mode from BASIC but I am losing characters, usually at the beginning of a line.
I thought that it might be because I was using the Apple IIe                   
hardwired to a VAXcluster at 4800 baud, so I get a copy of KERMIT.  But it
doesn't work at all.

Does anyone know the correct settings for KERMIT?
I have it set VT100,local-echo off,parity none,slot 2,device SSC v.1.9,
keyboard 2e,diplay-type 80-col slot 3,baud 4800,flow xon&xoff.

HELP.

Michael Niehaus
UUCP: ...!{uunet,pur-ee,iuvax}!bsu-cs!mithomas