Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!bu-cs!bucsb!eap
From: eap@bucsb.UUCP (Eric Pearce)
Newsgroups: comp.sys.apple
Subject: Re: Keyboard Help.....
Message-ID: <1275@bucsb.UUCP>
Date: Sun, 22-Nov-87 21:48:34 EST
Article-I.D.: bucsb.1275
Posted: Sun Nov 22 21:48:34 1987
Date-Received: Wed, 25-Nov-87 05:19:37 EST
References: <8711211708.AA11416@ucscb.UCSC.EDU>
Reply-To: eap@bucsb.UUCP (Eric Pearce)
Organization: BD&HR (Beer Drinkers & Hell Raisers)
Lines: 25

In article <8711211708.AA11416@ucscb.UCSC.EDU> nemesis@UCSCB.UCSC.EDU (Michael Deliman III) writes:
>
>	Iv'e had the old apple ][ + for a long time now, and the ol'
                                    ........
>	any suggestions from anyone who has added an external keyboard/
>	replaced a worn out one??? ( i can solder, etc. i just need a
>	source for a RELIABLE COMPATABLE and **INEXPENSIVE** replacement
>	keypad.......

I think "Jameco Electronics" of C.A has some keyboards.  If you can get hold 
of replacement key switches (maybe from a dealer?), they are easy enough to
replace.  All you have to do is push in the little tabs on the front of
the switch while heating the pads on the circuit board and pulling on the stem
of the switch.  (get someone to help you, in other words)

                                                            - Eric



-- 
**** .signature reduced in length due to space considerations *****************
| UUCP   : ..!harvard!bu-cs!bucsb!eap     |        ARPANET: eap@bucsb.bu.edu  |
| CSNET  : eap%bucsb@bu-cs                |        BITNET : cscc8vc@bostonu   |