Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!uwvax!uwmacc!uwmcsd1!lakesys!mark
From: mark@lakesys.UUCP (Mark Storin)
Newsgroups: comp.sys.atari.8bit
Subject: Re: Using Kermit65 with either the XM301 or 1030, HELP!
Message-ID: <292@lakesys.UUCP>
Date: Fri, 20-Nov-87 00:41:17 EST
Article-I.D.: lakesys.292
Posted: Fri Nov 20 00:41:17 1987
Date-Received: Sun, 22-Nov-87 10:56:07 EST
References: <19871111164904.1.JRD@GRACKLE.SCRC.Symbolics.COM> <1485@bsu-cs.UUCP> <3518@uwmcsd1.UUCP> <723@potpourri.UUCP>
Reply-To: mark@lakesys.UUCP (Mark Storin)
Organization: Lake Systems, Milwaukee, WI
Lines: 17
Keywords: Kermit, Kermit65, XM301, 1030, HELP!

In article <723@potpourri.UUCP> pkopp@potpourri.UUCP (Paul Kopp) writes:
>No, no, no!!!  The T: handler in NOT built into the XM301 OR the 1030
>modems.  The T: handler is usually appended (or pre-pended) to the
>modem PROGRAM you are using.                                         
>-------

	Not so, the 1030 modem does have the T: handler in ROM in the modem
along with a built in terminal program.  I don't believe that the XM301 has
this.  I believe there was some code floating around that would pull the
handler out of the 1030.



-- 
Mark A. Storin					|  These opinions are my own,
Lake Systems, Milw., WI				|  you can't have them!
UUCP:  {ihnp4,uwvax}!uwmcsd1!lakesys!mark       |