Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!sundc!pitstop!sun!imagen!atari!portal!cup.portal.com!Dion_L_Johnson
From: Dion_L_Johnson@cup.portal.com
Newsgroups: comp.sys.atari.st,comp.sys.ibm.pc
Subject: Re: NEEDED 5.25 inch drive info
Message-ID: <1290@cup.portal.com>
Date: Thu, 5-Nov-87 01:24:35 EST
Article-I.D.: cup.1290
Posted: Thu Nov  5 01:24:35 1987
Date-Received: Sat, 7-Nov-87 18:47:11 EST
References: <1987Oct31.111639.19546@gpu.utcs.toronto.edu>
Organization: The Portal System (TM)
Lines: 27
Xref: mnetor comp.sys.atari.st:6125 comp.sys.ibm.pc:9790
XPortal-User-Id: 1.1001.1680


In answer to this:

  Does anybody out there in NetLand know the Pinout designations for a
  Tandon TM-100-2A Floppy disk drive? (I am talking here about the edge
  connector on the back of the drive. I would image that just about any
        Pete Santangeli

I have a Tandon OEM manual for model TM-100-1 and -2 which says:
   pins
ground   signal             meaning
1       2       connector clamp
3       4       spare
5       6       select 3
7       8       index
9       10      select 0
11      12      select 1
13      14      select 2
15      16      drive motor enable (N MOTOR ON)
17      18      direction
19      20      step (N STEP)
21      22      Write gate
23      24      Track 00
25      26      Track 00
27      28      write protect
29      30      read data
Does this sound like what you wanted?  Good luck and write if
you need more info.  also at: ...uunet!sco!dionj