Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!hao!ames!ucbcad!zen!ucbvax!ucdavis!uop!exodus
From: exodus@uop.EDU (Freddy Kreuger)
Newsgroups: comp.sys.atari.st
Subject: Memory ugrades...
Message-ID: <755@uop.EDU>
Date: Mon, 16-Nov-87 14:57:41 EST
Article-I.D.: uop.755
Posted: Mon Nov 16 14:57:41 1987
Date-Received: Wed, 18-Nov-87 06:28:44 EST
Organization: Somewhere perpendicular to reality...
Lines: 21
Keywords: 1040ST, >2 Megs

Does anybody have the plans for a 1040ST memory upgrade?  I have looked
around and found a solderless board for $150, minus chips, of course.
Others range from 150-250.  Knowing how to use a soldering iron,etc., 
I'd prefer to do it myself but do not know enough about the internals of
the ST-beast.  I'd also prefer to use 256 DRAMs since they aren't as 
expensive as the 1 Megabit DRAMs (from what I have seen so far).  The
cheapest 1 Megabit DRAMs I have seen are 120 ns for 19.99 at JDR.

Please E-Mail to the address below and I'll post a summary if there
is an interest.

Thank you,
Greg


Greg Onufer   		GEnie: G.ONUFER		University of the Pacific
UUCP:	 ...!ucbvax!\				**POSTMASTER @ UOP**
		     -ucdavis!\
	...!lll-crg!/	       -uop.edu!{exodus, exodusr, postmaster, root}
	     ...!ptsfa!cogent!/
	     ...!cepu!retix!/