Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!mnetor!uunet!husc6!bloom-beacon!oberon!bbn!uwmcsd1!ig!jade!ucbvax!MARIST.BITNET!HARRY From: HARRY@MARIST.BITNET Newsgroups: comp.sys.atari.st Subject: (none) Message-ID: <8711251348.AA24789@ucbvax.Berkeley.EDU> Date: Wed, 25-Nov-87 08:19:38 EST Article-I.D.: ucbvax.8711251348.AA24789 Posted: Wed Nov 25 08:19:38 1987 Date-Received: Sat, 28-Nov-87 18:16:28 EST Sender: daemon@ucbvax.BERKELEY.EDU Organization: The ARPA Internet Lines: 37 Received: by MARIST (Mailer X1.25) id 2559; Wed, 25 Nov 87 08:16:43 EST Resent-Date: Wed, 25 Nov 87 08:16:29 EST Resent-From: "A. Harry Williams" Resent-To: INFO-ATARI16@SCORE.STANFORD.EDU Date: 25 November 1987, 10:14:50 MEZ From: S. Kaufmann +49 228 737773 UNM407 at DBNRHRZ1 TO: INFO-A16 AT MARIST ----------------------------Original message---------------------------- Re: Filetransfer between AT-Clone and Atari St I have an Atari 520 ST+ and an AT-Clone. Now I want to download some Files from the AT to the Atari. I tried it and Terminal mode works well, but Filetransfer with Kermit does not!! I put the AT in Server mode and started a GET (from Server) Command on the Atari. The AT went into Send File mode but got no acknoledge from the Atari. What pins must I connect between the computers, what communication parameters must I choose? I used UNITERM 1.7a and MS-Kermit 2.29c. Following Pins were connected: AT ATARI 1 --------------- 1 THE PIN FUNCTION IS THE SAME ON ATARI AND AT! 2 --------------- 3 2 = TX 3 --------------- 2 3 = RX 4 --------------- 5 4 = CTS 5 --------------- 4 5 = RTS 6 --------------- 20 6 = DTR ? 7 --------------- 7 7 = GND 8 --------------- 20 8 = DSR ? 20 --------------- 6 20 = DCD ? 20 --------------- 8 Please, can someone out in the net give me some help?! E-Mail direct to UNM407 at DBNRHRZ1.BITNET or to the digest. Thanks in advance Stefan Kaufmann ( UNM407%DBNRHRZ1.BITNET)