Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!mit-eddie!ll-xn!ames!sdcsvax!ucsdhub!udiego!stokes
From: stokes@udiego.UUCP (David M. Stokes)
Newsgroups: comp.sys.att
Subject: UUCP over TCP/IP
Message-ID: <517@udiego.UUCP>
Date: Wed, 11-Nov-87 13:49:32 EST
Article-I.D.: udiego.517
Posted: Wed Nov 11 13:49:32 1987
Date-Received: Sat, 14-Nov-87 02:27:55 EST
Organization: Univ. of San Diego, San Diego CA
Lines: 23
Keywords: Looking for a way to UUCP with WIN/3B

I have finally concluded that I would have less headaches running
UUCP over TCP/IP than waiting for my modems to free up. AT&T
says that you can't UUCP over TCP/IP but for a few more dollars,
you can buy StarLAN and ...

NNTP is out because this is System V 3.1 not BSD and beacuse I've
learned second hand that one of the NNTP authors recommends against
using it.

I was thinking of using two approaches. The first would be to
play with the files in /usr/lib/uucp until I got the right
combination. The second would be a shell script to find files
going out and reroute.

Is there anyone else in netland doing this? Any hints or
warnings?


-- 
David Stokes                   "USD where the future is tomorrow
Academic Computing Department   and today is slightly behind schedule"
University of San Diego
(619) 260-4810 or {sdcsvax, sdsu, ucsdhub}!udiego!stokes