Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!mit-eddie!ll-xn!ames!ptsfa!maxepr!ken
From: ken@maxepr.UUCP (Ken Brassler)
Newsgroups: comp.sys.att
Subject: Re: cursor & video monitor help
Message-ID: <489@maxepr.UUCP>
Date: Fri, 13-Nov-87 13:00:56 EST
Article-I.D.: maxepr.489
Posted: Fri Nov 13 13:00:56 1987
Date-Received: Sun, 15-Nov-87 09:50:42 EST
References: <3632@islenet.UUCP>
Reply-To: ken@maxepr.UUCP (Ken Brassler)
Organization: Brassler Engineering Co., Mill Valley, CA
Lines: 21

In article <3632@islenet.UUCP> richard@islenet.UUCP (Richard Foulk) writes:
>
>I'd really like to get a larger monitor ...
>please post the pinouts for the...
>8-pin connector...
>in the computer.

My diagrams show a 10-pin connector in the computer. If you can
resolve this difference, these are the pinouts.

Pin(s)		Function

 1		video vertical synch
 2,4,6,8,10	ground
 3		video horizontal synch
 5		video out
 7,9		+12v
-- 

Ken Brassler {ihnp4|qantel|pyramid|lll-crg}!ptsfa!maxepr!ken
			   ....ethos!gladys!ptsfa!maxepr!ken