Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!hao!oddjob!gargoyle!ihnp4!homxb!genesis!shlepper!andys
From: andys@shlepper.ATT.COM (a.b.sherman)
Newsgroups: comp.sys.att
Subject: Re: Adding extra console window gettys: maybe not a good idea
Message-ID: <169@shlepper.ATT.COM>
Date: Sat, 14-Nov-87 18:20:57 EST
Article-I.D.: shlepper.169
Posted: Sat Nov 14 18:20:57 1987
Date-Received: Sun, 15-Nov-87 20:56:29 EST
References: <750@neoucom.UUCP> <47@cjsa.UUCP>
Organization: AT&T Bell Laboratories, Middletown, NJ
Lines: 16
Summary: Break on the expansion board?

In article <47@cjsa.UUCP>, jeff@cjsa.UUCP (C. Jeffery Small) writes:
> [Deleted description of a very sick 3B1]
> the problem repeats.  I have three 3B1 systems and this problem only occurs
> on one machine.  The suspect machine has a 2-port expansion board and is
> used as the primary machine for uucp (usenet) feed.  These are the only


I have never seen the problem, but I have read on the net that there
is one version of the combo board that crashes the 3B1 when a break
is received.  Could that be your problem.  Other folks who have
saved past postings could contribute the revision level that's bad.
-- 
Andy Sherman / AT&T Bell Laboratories (Medical Diagnostic Systems)
480 Red Hill Road / Middletown NJ 07748 / (201) 615-5708
UUCP: {ihnp4,allegra,akgua,cbosgd,mtune....}!shlepper!andys
INTERNET: andys@shlepper.ATT.COM