Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!hao!boulder!sunybcs!rutgers!mcnc!drain
From: drain@mcnc.UUCP (Jerome Drain)
Newsgroups: comp.sys.cbm
Subject: Help!
Message-ID: <2653@alvin.mcnc.UUCP>
Date: Wed, 11-Nov-87 16:24:19 EST
Article-I.D.: alvin.2653
Posted: Wed Nov 11 16:24:19 1987
Date-Received: Sat, 14-Nov-87 03:23:55 EST
References: <1784@charon.unm.edu> <847@uokmax.UUCP>
Reply-To: drain@alvin.UUCP (Jerome Drain)
Organization: Microelectronics Center of NC; RTP, NC
Lines: 20
Keywords: characters tilde

I was wondering if anyone out there(here, whatever) has the same
configuration as I do: I have 3 1541s, 1 1571, and 1 Blue Chip.
The problem is this: 1 of my 1541s is 8 another is 9 and the other is
a default 8, my 1571 is a 11, and the Blue Chip is default 8, now by
the software method I change the Blue Chip to 10 and the other 1541 to
12, however when I load up another program the drive 12 has no idea what
number it is and it does nothing.  But after I change the drive #s(software
method) and directory all the drives it works(drives 8-12 directory OK), but
when I go to load up the other program SHURE NUFF drive 12 is stupid(doesn't
work)! I know you can have more than the 4 drives the book speaks of(8-11), 
I have seen it done before, but not sure how.  Is it something with the Blue
Chip or what?? I am posing a question: If I permanently change the other
1541 to 10, and then change the Blue Chip by the software method would
that help?? Oh well are you confused? Don't ask me I am confused to!!
Actually if anyone out there understands my problem PLEASE HELP!!

//////////////////////////////////////////////////////////////////
\Four score and seven years ago our....Forget it we are here now.\
//////////////////////////////////////////////////////////////////