Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!bloom-beacon!gatech!rutgers!meccts!viper!dave
From: dave@viper.Lynx.MN.Org (David Messer)
Newsgroups: comp.sys.ibm.pc
Subject: Need info on IBM GPIB (IEEE-488) board.
Message-ID: <271@viper.Lynx.MN.Org>
Date: Sat, 7-Nov-87 14:56:11 EST
Article-I.D.: viper.271
Posted: Sat Nov  7 14:56:11 1987
Date-Received: Tue, 10-Nov-87 01:16:03 EST
Reply-To: dave@viper.UUCP (David Messer)
Organization: Lynx Data Systems, Eagan, MN
Lines: 20

I have an IBM GPIB (IEEE-488) board for the IBM-PC for which I
would like to write a driver.  Unfortunatly, the only
information I have about the board is how to install it in the
PC.  There is no mention of how to program it.  I have the
hardware specs for the GPIB chip that is used on the board but
have no idea of how to get at it from the PC.  If anyone has
any information on this board, especially I/O addresses, I
would very much appreciate a reply.  Please reply via EMAIL.

Thanks in advance.
-- 
If you can't convince |   David Messer - (dave@Lynx.MN.Org)
them, confuse them.   |   Lynx Data Systems
   -- Harry S. Truman |
                      |   amdahl  --!meccts!viper!dave
                      |   rutgers /

Copyright 1987 David Messer -- All Rights Reserved
This work may be freely copied.  Any restrictions on
redistribution of this work are prohibited.