Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!rutgers!ames!ucbcad!zen!ucla-cs!jsin
From: jsin@CS.UCLA.EDU
Newsgroups: comp.sys.ibm.pc,comp.lang.c
Subject: Re: TURBO C Linking Problem
Message-ID: <9112@shemp.UCLA.EDU>
Date: Wed, 11-Nov-87 00:43:55 EST
Article-I.D.: shemp.9112
Posted: Wed Nov 11 00:43:55 1987
Date-Received: Sat, 14-Nov-87 01:35:52 EST
References: <2293@watcgl.waterloo.edu>
Sender: root@CS.UCLA.EDU
Reply-To: jsin@CS.UCLA.EDU (John Sin)
Distribution: na
Organization: UCLA School Of Engineering &  Applied Science
Lines: 19
Keywords: TURBO C Linking
Xref: mnetor comp.sys.ibm.pc:10023 comp.lang.c:5370


I also have a problem linking under TC. I have one file with few procedures,
and the program compiles ok. But when I link the .OBJ file to get .EXE file,
the Linker gives me "module _main unresolved" or some such nonsense.
Of course, main() is in my file and it compiles and runs fine using other
compilers, such as Mark Williams C compiler(I can't afford MSC).

I did get TC to link it using the TLINK (command line linker) finally.
Is this a known bug? Or did I do something wrong?

Thanks to all who respond.
                                                John


John (Jonghoon) Sin
UCLA SEASnet Facilities   ARPA:   jsin@seas.ucla.edu
2567 Boelter Hall         BITNET: jsin%seas.ucla.edu@wiscvm.wisc.edu
Los Angeles, CA. 90025    UUCP:   ...!{ihnp4,ucbvax,{hao!cepu}}!ucla-cs!jsin
(213) 206-6864