Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!necntc!dandelion!ulowell!hawk.ulowell.edu!boneill
From: boneill@hawk.CS.ULowell.Edu (Debugger)
Newsgroups: comp.sys.tandy,comp.sys.ibm.pc
Subject: Generic RS-232 Board and Modem
Message-ID: <2028@ulowell.cs.ulowell.edu>
Date: Mon, 23-Nov-87 00:02:41 EST
Article-I.D.: ulowell.2028
Posted: Mon Nov 23 00:02:41 1987
Date-Received: Wed, 25-Nov-87 20:32:08 EST
Sender: news@ulowell.cs.ulowell.edu
Reply-To: boneill@hawk.cs.ulowell.edu (Debugger)
Distribution: na
Organization: University of Lowell, CS Dept
Lines: 29
Keywords: Getting them to work...
Xref: mnetor comp.sys.tandy:587 comp.sys.ibm.pc:10417


  My friend has just purchased a generic RS-232C board for his Tandy 1000.
  He also got a Mitac 1200D modem. After hooking it all up, the modem
  doesn't seem to want to pick up the phone line. Can anybody help?

RS-232 Specs:

	Address: 3F8-3FF (COM1)
	Interrupt: IRQ4

(Can a generic PC board work with the 1000? It is a Half-card for XT
compatibles.)

Modem specs:

	Bell 103 and 212A Compatible
	Hayes 'AT' command set
	Transmit level: -9dBm
	Sensitivity: -45dBm

The TERM READY and HIGH SPEED lights stay on all the time. When commands
are given or keys are pressed on the keyboard, the SEND DATA and RECIEVE
DATA lights flicker briefly. We are using Procomm V2.4.2

	Thanx in advance.

=========================================================================
Brian O'Neill				University of Lowell CS Dept.
boneill@hawk.cs.ulowell.edu