Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!lll-winken!csustan!polyslo!mdella
From: mdella@polyslo.UUCP (Marcos R. Della)
Newsgroups: comp.sys.intel,comp.unix.xenix,comp.unix.questions
Subject: Brain dead Uucico program
Message-ID: <690@polyslo.UUCP>
Date: Thu, 5-Nov-87 16:00:48 EST
Article-I.D.: polyslo.690
Posted: Thu Nov  5 16:00:48 1987
Date-Received: Sun, 8-Nov-87 04:27:19 EST
Organization: Cal Poly State Univ,CSC Dept,San Luis Obispo,CA 93407
Lines: 25
Keywords: Problems with L.sys script
Xref: mnetor comp.sys.intel:390 comp.unix.xenix:1113 comp.unix.questions:4812

I was connected to the polyslo site, but because of a recient refurnishing
of the equipment there, I have had to come up with a new script file for
the L.sys file...

In the process of working on this for the last two days, I have discovered
the following things about my L.sys file...

First off, I am running Xenix R3.4 on an Intel 310/311 system. This help?
 
When you use "" "" it immediatly sends    ""<CR> insted of just  <CR>
When you use \015 you get      \015<CR>
When you use \0D you get       \0D<CR>
When you use \r you get        \r<CR>
etc...
 
Basically I can't figure out how to send the sequence <CR><CR> in order
to get the attention of their front end processor... Can anyone out
there give me a clue?

Marcos R. Della

-- 
...!lll-crg --> !csustan --\                         | Whatever I said doesn't
                            >->!polyslo!caus-dp!root | mean diddly as I forgot
  ...!ihnp4 --> !csun -----/                         | it even before finishing
             ...!dmsd ----/                          | typing it all out!!!