Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!lll-winken!lll-lcc!pyramid!voder!wlbr!pete
From: pete@wlbr.EATON.COM (Pete Lyall)
Newsgroups: comp.sys.m6809
Subject: Re: OS9 load command
Message-ID: <1142@wlbr.EATON.COM>
Date: Tue, 17-Nov-87 20:31:55 EST
Article-I.D.: wlbr.1142
Posted: Tue Nov 17 20:31:55 1987
Date-Received: Fri, 20-Nov-87 07:25:42 EST
References: <1987Nov16.142303.4540@gpu.utcs.toronto.edu>
Reply-To: pete@wlbr.UUCP (0000-Pete Lyall)
Organization: Eaton IMS, Westlake Village, CA
Lines: 26

In article <1987Nov16.142303.4540@gpu.utcs.toronto.edu> ac@gpu.utcs.toronto.edu (Mark Acfield) writes:
>
>
>   The OS9 level I load command allows you to specify multiple modules
>to be loaded as in:
>load dir copy backup format
>OS9 level II command also allows this syntax but if you specify to many 
>modules you will get a 207 error.  

The load command is set up this way so you can achieve multiple loads
into the same block(s) & map. If memory serves:

load prog1 prog2 prog3

Is the same as:

merge prog1 prog2 prog3 >buncha_progs;load buncha_progs


Loads on separate lines operate independantly.


-- 
                                                   Pete Lyall

Usenet:     {trwrb, scgvaxd, ihnp4, voder, vortex}!wlbr!pete
Compuserve: 76703,4230 (OS9 Sysop) OS9 (home): (805)-985-0632 (24hr./1200 baud)