Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!rutgers!ames!sdcsvax!ucsdhub!hp-sdd!hplabs!hpcea!twakeman
From: twakeman@hpcea.CE.HP.COM (Teriann Wakeman)
Newsgroups: comp.sys.mac
Subject: Re: Plotting Software for MAC
Message-ID: <430006@hpcea.CE.HP.COM>
Date: Tue, 17-Nov-87 19:52:20 EST
Article-I.D.: hpcea.430006
Posted: Tue Nov 17 19:52:20 1987
Date-Received: Sat, 21-Nov-87 01:10:52 EST
References: <692@ncsugn.ncsu.edu>
Organization: HP Corporate Engineering - Palo Alto, CA
Lines: 23

What you need is MacPlottsII from Computershoppe. PO BOX 18344 Greensboro,
N.C. 27419  (919)299-4843. 

I have been plotting from the Mac for a couple of years now & I think this
IS THE BEST AVAILABLE.  They have two versions, Business (supports only
A & B size paper indluding the HP 7475A [serial interface only]) and a 
drafting version which supports both the small and big birtha plotters.
The manual gets a C- but online phone help is exellent. If you have a
laserwriter you can print on special transparancy stock & get better
quality overhead slides then from a plotter. I have been doing all
my presentation slides on one for about a year now & you can really
tell the difference.

So... for plotting on a Mac get MacPlotts II and a HP Plotter ( the best on
the market)

No connection with Computter Shoppe but connected to HP printers via my
paycheck (buy them plotters!!!)

TeriAnn Wakeman

HPMUG co-ordinator
(415)857-5057 - Ma Bell