Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!bloom-beacon!gatech!mcnc!rti!sas!cole
From: cole@sas.UUCP (Tom Cole)
Newsgroups: comp.sys.mac
Subject: Re: Digitized Sound Problems
Message-ID: <200@sas.UUCP>
Date: Sun, 22-Nov-87 14:59:21 EST
Article-I.D.: sas.200
Posted: Sun Nov 22 14:59:21 1987
Date-Received: Tue, 24-Nov-87 06:42:02 EST
References: <MVdDFiy00VQ2yoQ1Os@andrew.cmu.edu>
Organization: SAS Institute Inc.,Cary NC,25712
Lines: 13
Summary: I need help with Macintalk...


[This is actually a new question, but our news is brain damaged...]

I have a Mac SE with a Radius Accelerator in it.  When the accelerator is
fully enabled ('020, code and data caching on) then Macintalk sounds like
a throat cancer victim - basically like lots of bytes are missing in the
sound buffer, or something.  It's not timing dependant because I can leave
the '020 on but turn off the caches (must be both!) and it sounds fine.  I
am using Macintalk 1.2, May 1985.  Is there a newer version, and does anyone
know if it solves the problem (perhaps someone who has such a hardware
configuration - *Rich*)?!?

Many thanks to anyone who can help...