Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!sundc!pitstop!sun!amdcad!ames!ll-xn!husc6!ut-sally!im4u!suhler
From: suhler@im4u.UUCP (Paul A. Suhler)
Newsgroups: comp.sys.mac.hypercard
Subject: Dial with non-Hayes modem?
Message-ID: <2390@im4u.UUCP>
Date: Wed, 4-Nov-87 21:53:08 EST
Article-I.D.: im4u.2390
Posted: Wed Nov  4 21:53:08 1987
Date-Received: Sat, 7-Nov-87 18:35:16 EST
Reply-To: suhler@im4u.UUCP (Paul A. Suhler)
Distribution: na
Organization: Univ of Texas Electrical & Computer Engineering Dept
Lines: 13

Now that more people have more experience with HyperCard, I'll ask
this again.

Is it possible to make the "dial with modem" command use an arbitrary
command prefix, not the "ATSO=" that Hayes-compatibles like?  My
Novation SmartCat wants a %d <number>, although it can be commanded
to change the excape character from '%' to anything else.  So far
I haven't been able to get it to accept anything from HyperCard and
I haven't found anyone who either has tried or knows.

Thanks.  I'll post a summary of responses if there's interest.
-- 
Paul Suhler        suhler@im4u.UTEXAS.EDU	512-474-9517/471-3903