Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!hao!boulder!sunybcs!rutgers!bellcore!faline!ulysses!mhuxt!ihnp4!homxb!mtuxo!mtune!codas!novavax!hcx1!hcx2!daver
From: daver@hcx2.SSD.HARRIS.COM
Newsgroups: comp.sys.tandy
Subject: 1000-SX and KERMIT
Message-ID: <47800001@hcx2>
Date: Wed, 4-Nov-87 07:49:00 EST
Article-I.D.: hcx2.47800001
Posted: Wed Nov  4 07:49:00 1987
Date-Received: Wed, 11-Nov-87 03:28:59 EST
Lines: 12
Nf-ID: #N:hcx2:47800001:000:567
Nf-From: hcx2.SSD.HARRIS.COM!daver    Nov  4 07:49:00 1987


I have a Tandy 1000-SX, with a VM-4 monochrome monitor.  Having installed
the public domain version of KERMIT, I dial in to our supermini.  KERMIT
is emulating a VT102.  

Normally when hitting the <RET> key, nothing unusual happens.  But if I'm
on the bottom line of the screen, <RET> causes the screen to bounce for 
half a second and then return to normal.  (This bouncing seems to be the
same effect observed when powering on the machine.)

A colleague suggested that this behavior is peculiar to the 1000-SX?  Does
anyone have any insight into this peculiarity?