Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!dalcs!garfield!hans
From: hans@garfield.UUCP (Hans Rollmann)
Newsgroups: comp.sys.tandy
Subject: TANDY 100/102 and PROCOMM HOST MODE
Message-ID: <4203@garfield.UUCP>
Date: Wed, 11-Nov-87 19:56:20 EST
Article-I.D.: garfield.4203
Posted: Wed Nov 11 19:56:20 1987
Date-Received: Sat, 14-Nov-87 06:48:54 EST
Organization: CS Dept., Memorial U. of Newfoundland, St. John's
Lines: 15
Keywords: TANDY 100/102 -- PROCOMM HOST MODE


Subject: TANDY 100/102 and PROCOMM HOST MODE
11-Nov-87  20:59:00
Sb: Procomm Host Mode
To: all

I have difficulties getting into the S)hell when communicating with my Home
Computer via the RS232 port. The screen always freezes, and I have
to cold-boot the computer. I am using a T102 at 300 baud. My DOS version in
the host computer, a T1200 is 2.11. I have no problems with the other choices 
of the Host Mode: C)hat; F)iles; D)ownload; U)pload; G)oodbye. Any suggestions 
what I might be doing wrong? Thanks for any help. Hans. (hans@garfield.uucp; 
hrollman@munucs.uucp; hans@mun.bitnet; hans@kean.mun.cdn)      
Newsgroups: comp.sys.tandy
Keywords: TANDY 100/102 -- PROCOMM HOST MODE