Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!hao!oddjob!gargoyle!ddsw1!michael
From: michael@ddsw1.UUCP (Michael Duebner)
Newsgroups: comp.sys.tandy
Subject: Re: TANDY 100/102 and PROCOMM HOST MODE
Message-ID: <333@ddsw1.UUCP>
Date: Fri, 13-Nov-87 21:09:00 EST
Article-I.D.: ddsw1.333
Posted: Fri Nov 13 21:09:00 1987
Date-Received: Sun, 15-Nov-87 11:51:45 EST
References: <4203@garfield.UUCP>
Reply-To: michael@ddsw1.UUCP (Michael Duebner)
Organization: AERA Tech Services, Buffalo Grove, IL
Lines: 18
Keywords: TANDY 100/102 -- PROCOMM HOST MODE

In article <4203@garfield.UUCP> hans@garfield.UUCP (Hans Rollmann) writes:
>
>I have difficulties getting into the S)hell when communicating with my Home
>Computer via the RS232 port. The screen always freezes, and I have
>to cold-boot the computer. I am using a T102 at 300 baud. My DOS version in
>the host computer, a T1200 is 2.11. 

It sounds as if you simply do not have enough memory in your T1200 to
execute another copy of Command.Com on top of Procomm.

If I remember correctly the T1200 comes stock with only 256K of RAM.


-- 

Michael Duebner	                UUCP : ddsw1!michael
Technical Services, Buffalo Grove, IL   312/541-6550
[Help is only a phone call away for members of AERA]