Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!ccicpg!felix!chuck
From: pludwig@ccng.UUCP (Paul Ludwig)
Newsgroups: comp.unix.ultrix
Subject: Re: panic: out of mbuf map
Message-ID: <12689@felix.UUCP>
Date: Thu, 12-Nov-87 18:22:12 EST
Article-I.D.: felix.12689
Posted: Thu Nov 12 18:22:12 1987
Date-Received: Sun, 15-Nov-87 07:52:03 EST
Sender: chuck@felix.UUCP
Reply-To: pludwig@ccng.UUCP (Paul Ludwig)
Lines: 9
Approved: zemon@felix.UUCP

Reply-Path:


We have a number of MVII running ultrix and your mbuf map error
is due to the qeo error. I would assume that the deqna (ethernet-
controller ) is going bad. Usually a mbuf map message followed by 
a qe0 retart shows that the ethernet is sending or recieving other
peoples data and not clearing its buffers which is the mbuf map
problem. This problem is over come as a problem in the new 2.0
version of ultrix that is available now from digital. I would
also having the ethernet board changed or reseat the address
chip on the board.