Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!cmcl2!nrl-cmf!ames!sgi!sgistl!mike
From: mike@sgistl.SGI.COM (Michael Ashburn)
Newsgroups: comp.unix.xenix
Subject: clockrate on SCO XENIX
Message-ID: <5543@sgistl.SGI.COM>
Date: Fri, 6-Nov-87 15:51:23 EST
Article-I.D.: sgistl.5543
Posted: Fri Nov  6 15:51:23 1987
Date-Received: Mon, 9-Nov-87 04:28:19 EST
Distribution: na
Organization: Silicon Graphics Inc, Mountain View, CA
Lines: 10
Keywords: goldenstar clockrate adjust

I have SCO XENIX running on my AT clone. It is one of the older, slower clones
that run either 6 or 8 MHZ. My problem is I would like to go ahead and run it
at 10 MHZ but this causes the clock to become way off very quickly. I have the
SCO clockrate program to adjust the clock but have never been able to get it 
adjusted correctly. Any help on what variable to set the clockrate at for 
8 MHZ would be appreciated.

Thanks Mike

{inh4p|decwrl|sun|ucbvax}sgi!sgistl!{mike|slacbbs!{mike|root}}