Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!princeton!phoenix!pucc!DTREADW
From: DTREADW@pucc.UUCP
Newsgroups: sci.electronics
Subject: Wanted: SPICE device model parameters
Message-ID: <3939@pucc.Princeton.EDU>
Date: Tue, 24-Nov-87 23:05:04 EST
Article-I.D.: pucc.3939
Posted: Tue Nov 24 23:05:04 1987
Date-Received: Sat, 28-Nov-87 12:48:18 EST
Reply-To: DTREADW@pucc.Princeton.EDU
Organization: Princeton University, NJ
Lines: 17
Disclaimer: Author bears full responsibility for contents of this article

The  Princeton  University  Department  of  Electrical  Engineering  is
looking for a  public-domain library of the  circuit simulation program
SPICE  device model  parameters.   We  would  like several  transistors
(especially 3904, 3906), a couple of diodes, and, if possible, a couple
of good op-amp subcircuits using devices defined in the library.   I/We
know of the existence of such a  library for the PSpice package for the
IBM PC,  but  this is copy-written and  illegal to copy.   We  need the
library for SPICE 2.0 or SPICE 3.0.
 
We would  greatly appreciate any information  on where we  might obtain
such a library, or better,  actually getting a library.   Please E-Mail
to the address  below;  as usual,  responses will be  summarized to the
net.  Thanks in advance for any help.
                    -----------------------------------------------------
                    | Dave Treadwell
                    |     Bitnet:  DTREADW@PUCC
                    |     UUCP:    ...allegra!psuvax1!PUCC@BITNET!DTREADW