Path: utzoo!mnetor!uunet!husc6!bbn!rochester!PT.CS.CMU.EDU!cadre!pitt!cisunx!ejkst
From: ejkst@cisunx.UUCP (Eric J. Kennedy)
Newsgroups: comp.sys.amiga
Subject: Re: Trouble with FaccII
Message-ID: <6000@cisunx.UUCP>
Date: 18 Dec 87 03:53:37 GMT
References: <1373@husc2.UUCP>
Organization: Univ. of Pittsburgh, Comp & Info Sys
Lines: 19

In article <1373@husc2.UUCP>, wen2@husc2.UUCP (wen2) writes:
> In article <259@afit-ab.arpa> strovink@afit-ab.arpa (Mark Strovink) writes:
> >Is it just me?
> >   My startup sequence mounts VD0: (size of 1.5M), loads WB, copies
> >sys: to VD0:, assigns everything to vd0:, and starts CONMAN 1.0, WKEYS,
> >POPCLI III, and the new ClickUpFront.
>  ^^^^^^^^^^
> 	 |
> This could be your problem.  PopCLI III is not a recommended product--use
> PopCLI II.

This is news to me.  What's wrong with PopCLI III?  I've been using it
for a couple of months with nary a problem.
 
For the record, I use a 1.5M vd0:, wkeys, popcli III, ad nauseum, and I
only _rarely_ lose vd0:, and usually because I filled it _completely_
full then crashed.

Eric Kennedy