Path: utzoo!mnetor!uunet!cbmvax!bill
From: bill@cbmvax.UUCP (Bill Koester CATS)
Newsgroups: comp.sys.amiga
Subject: Re: warped computer
Message-ID: <3052@cbmvax.UUCP>
Date: 30 Dec 87 01:01:12 GMT
References: <2226@crash.cts.com>
Reply-To: bill@cbmvax.UUCP (Bill Koester CATS)
Organization: Commodore Technology, West Chester, PA
Lines: 17

In article <2226@crash.cts.com> steelie@pro-charlotte.cts.com (Jim Howard) writes:
>Has anyone out there encountered the 'banana syndrome' on their Amiga
>1000's yet?  My amiga is warped in the center so much that the
>keyboard has to be forcefully slid under the machine!  Ive just got
>a stock 1080 monitor, nothing heavy. Is this something to be worried
>about, i.e. motherboard cracking in half under the strain? 
> 
The 1000's case does not have much support in the middle. You could use a
piece of wood or metal cut to the same size to distribute the load to the
outer edges of the case where it is stronger.


-- 
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Bill Koester (CATS)          >>Commodore Amiga Technical Support<<
Commodore International Ltd. UUCP ..{allegra|burdvax|rutgers|ihnp4}!cbmvax!bill 
		             PHONE  (215) 431-9355