Path: utzoo!utgpu!water!watmath!clyde!rutgers!sdcsvax!ucsdhub!jack!crash!pnet01!amiguy
From: amiguy@pnet01.cts.com (Sean Wolfe)
Newsgroups: comp.sys.amiga
Subject: Serial
Message-ID: <2287@crash.cts.com>
Date: 6 Jan 88 09:31:33 GMT
Sender: news@crash.cts.com
Organization: People-Net [pnet01], El Cajon CA
Lines: 45

This is a Help me question for the hardware wizzes.

Ok, I bought a used RS232 terminal capaible from 50 to 19.5Kbaud, great.
Now, I need to know how to make a null modem cable.
Of course my standard Amy to Modem cable doesn't work...
The Terminal is standard:
1  Frame Gnd.              2 Transmit Data Output
3  Rec. Data Input         4 Request to send out.
5  Clear to send input     6 Data Set Ready Inp. (opt.)
7  Sig. Gnd.               8 Carrier Dectect Input
20 Data Term. Ready Output 9 20 mA ...
14 20 Ma...               10 Detected Current Loop data
25 Current Loop + transmit 13  Current Loop - transmitt
12 Current Loop + reveice  24  Current Loop - Receive
--------^^from the terminal manual-^^^^-------------
So, what do I match the Amiga pinout's with on this?

I've tried the following:
 
AMIGA          TERMINAL
-------------------------
TD             RD
RD             TD
RTS CTS        DCD
DSR RI         DTR
GND            GND
DCD            RTS CTS
DTR            DSR RI

But It doesn't quite work, in fact Not at all.....

Also,
Among the many dip switches are

  #8 DCD Disconnected and DCD Conneceted
  #9 DSR "     "          DSR     "  "
 #10 DTR "     "          DTR     "  "

The others I fugured out such as Baud.
The terminal is a TeleVideo Mod 920 c by the way...
I got it for $35.00 Works in a local mode...

Can anyone help me get this thing going.. 
Thank's In Advance,
  Sean