Path: utzoo!mnetor!uunet!husc6!hao!oddjob!gargoyle!ihnp4!mhuxu!cbz
From: cbz@mhuxu.UUCP (Craig B. Ziemer)
Newsgroups: comp.sys.atari.st
Subject: Re: cartridge slot kludge boards
Message-ID: <7110@mhuxu.UUCP>
Date: 31 Dec 87 13:54:09 GMT
References: <1345@pixar.UUCP>
Organization: AT&T Bell Laboratories, Reading, PA
Lines: 23
Keywords: cartridge slot

In article <1345@pixar.UUCP>, mgr@pixar.UUCP (Michael Griffin Russell) writes:
> Anyone out there know a company that sells a prototype
> board for the ST cartridge slot.  Any info on physically
> plugging into the cartridge slot would be appreciated.

I recently built a battery-backed real-time clock and a four
channel A/D converter to plug into my cartridge port. I bought
the board from,

                       Douglas Electronics
                       718 Marina Blvd.
                       San Leadro, CA 94577
                       (415) 483-8770

The board fits perfectly into the cartridge slot.  It has holes
spaced at 0.10 inches, 20 rows by 30 columns, with 8 rows dedi-
cated for power and ground buses.  The part number is 33-DE-40,
costs $10.00, they'll ship it however you want, and they accept
MC and VISA.  I have nothing to do with this outfit other than
being a satisfied customer.

Craig Z. at AT&T
mhuxu!cbz