Path: utzoo!utgpu!water!watmath!221.162.fido!Usenet_area_"Cs.I.Pc"
From: 221.162.fido!Usenet_area_"Cs.I.Pc"@watmath.waterloo.edu
Newsgroups: comp.sys.ibm.pc
Subject: 1.44 Mb 3.5" floppy disk on an AT
Message-ID: <16194@watmath.waterloo.edu>
Date: 7 Jan 88 14:35:16 GMT
Sender: ugate@watmath.waterloo.edu
Lines: 26

From Usenet: rutgers!labrea!lindy!ral
From: ral@Lindy.STANFORD.EDU (Rich Levitt)
Newsgroups: comp.sys.ibm.pc
Subject: 1.44 Mb 3.5" floppy disk on an AT
Keywords: 1.44Mb 3.5" floppy disk
Message-ID: <450@Lindy.STANFORD.EDU>
Date: 8 Jan 88 00:50:03 GMT
Reply-To: ral@Lindy.UUCP (Rich Levitt)
Distribution: comp.sys.ibm.pc
Organization: Stanford Data Center
Lines: 11

I have a 6/10 Mhz AT clone with a Western Digital hard/floppy disk
controller.  I intend to add a 3.5" floppy and was wondering if I
could use the 1.44 Mb version.  I have been told that the 1.44 drive
requires a 10 Mhz CPU which is why IBM doesn't put them in the Model
50.  I'd appreciate hearing from anyone that has tried this -
successfully or otherwise.  Thanks
--------------------------------------------------------------------
Rich Levitt                  Bitnet: gg.ral@stanford
IR - Data Center
Stanford University
Stanford, Ca.  94305

--- via UGate v1.6
 * Origin: watmath (221/163)