Path: utzoo!mnetor!uunet!wa3wbu!eric
From: eric@wa3wbu.UUCP (Eric Rosenberg)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Need Clock reading prog for Leading Edge Model D
Message-ID: <432@wa3wbu.UUCP>
Date: 19 Dec 87 21:08:46 GMT
References: <651@pdp.cs.OHIOU.EDU> <908@maccs.UUCP>
Organization: WA3WBU, Marysville,PA
Lines: 17
Keywords: clock leading edge pc
Summary: Sperry and Leading Edge Model "D" are not the same

In article <908@maccs.UUCP>, darel@maccs.UUCP (Darel Mesher) writes:
> 
>    Since the Leading Edge PC and the SPERRY PC are the same Mitsubishi box 
> marketed by two different corporations, the following utility should work
> without modification.
> 
 
The Leading Edge PC *was* made by Mitsubishi and also marketed by Sperry.
The Model D, however, was built by Daewoo Industries in Korea, and in no way 
resembles the LE/Mitsubishi machine.

Eric

-- 
Eric Rosenberg                     |        Packet: WA6YBT @ WA6YBT
WITF-TV                            |        UUCP: uunet!wa3wbu!eric
Harrisburg,PA                      |        ARPA: wa3wbu!eric@uunet.UU.NET