Path: utzoo!utgpu!water!watmath!clyde!rutgers!rochester!udel!gatech!mcdchg!usenet
From: harty@cg-atla.UUCP (Kevin Harty)
Newsgroups: comp.newprod
Subject: PC/AT to Versatec Interface
Message-ID: <3629@mcdchg.UUCP>
Date: 27 Jan 88 16:40:10 GMT
Sender: usenet@mcdchg.UUCP
Followup-To: poster
Organization: CAD/CAM Technologies, Waltham Ma
Lines: 48
Approved: usenet@mcdchg.UUCP

***** Posting for a friend do NOT reply to me. *****

          CAD/CAM Technologies Inc. announces PLOTDOT a

PC/AT to Versatec Plotter Interface

     PLOTDOT is a new product  which  works  with  many
well  known PC based CAD/CAM products to produce a plot
on VERSATEC Electrostatic printers.

*    Versatile

     PLOTDOT works with  Autocad,  ComputerVision  Per-
sonal  Designer, Intergraph and others.PLOTDOT supports
almost  all  Versatec  Plotter  Models.PLOTDOT  can  be
operated with BATCH processing.

*    Performance

     PLOTDOT has shown to be four to Eight times faster
than  a  Pen  Plotter  It  has  a  short payback period
because it cuts down the amount of  time  drafters  and
engineers  are waiting for their plots.A complex E size
drawing has plotted  in  less  than  eight  minutes  as
opposed to 45 minutes to an hour for a pen plotter.

*    Features

     Over 50 User selectable options including:Clipping
Window  and  Viewport,  Rotation,Plot Striping, Copies,
Scale ,Mirror, Inverse, Raster Data Translate,  accepts
Calcomp 906 or Calcomp 960 format files.

*    Requirements

                - PC/AT or Compatabile
                - 640K Memory
                - 80287 Math Co-processor
                - MS-DOS 3.1 or Later
                - 1.2 MB Floppy + 20 MB Hard Drive


*    CONTACT

          CAD/CAM Technologies , Inc.
          504 Totten Pond Road
          Waltham, Ma 02154
          (617)-895-1500