Path: utzoo!mnetor!uunet!husc6!bbn!rochester!ur-tut!sunybcs!moogvax!terry
From: terry@moogvax.UUCP (Terry Westley)
Newsgroups: comp.os.vms
Subject: Wanted: how to use DRV11-J on MicroVAX under VMS
Message-ID: <692@moogvax.UUCP>
Date: 21 Jan 88 21:46:04 GMT
Distribution: na
Organization: Moog Inc. Electronics & Systems Division, Orchard Park NY
Lines: 17
Keywords: parallel ports, DRV11-J, LIO$, QIO$, PFNMAP

I am attempting to read/write to the parallel ports on a DRV11-J
compatible board (Grant Technology Corp. Model 362 64 line parallel board)
on a MicroVAX under VMS.

I have had no success using either LabStar routines (LIO$) or directly
via PFNMAP section.

Anyone have a piece of code they could send me that shows how to do this?
I prefer the PFNMAP section method, but am also interested in any code
that works whether it uses PFNMAP, LIO$ or QIO$.

Please e-mail.  Thanks much for your help.
-- 
  Terry Westley         
  Moog, Inc. (no, not the synthesizer company)
  East Aurora, NY  14052-0018
  {boulder,decvax,rocksanne,rutgers,ames}!sunybcs!moogvax!terry