Path: utzoo!utgpu!water!watmath!clyde!rutgers!ukma!psuvm.bitnet!cunyvm!maine.bitnet!walt
From: WALT@MAINE.BITNET (Walter G. Horbert)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: Re: Using SLIP w/dial-out modems
Message-ID: <185WALT@MAINE>
Date: 20 Jan 88 01:54:17 GMT
References: <8801091906.AA19637@spdcc.COM>
Organization: University of Maine System
Lines: 18

>I forgot to mention that the way we told the Telebit to dial was with a
>standard asynch communications program, whatever was on the machine.  Then,
>we told it to exit, but leave the modem connection up, and there we were.
>I assume this would work with KA9Q (I guess it already includes a SLIP driver?
>
>James VanBokkelen
>FTP Software.
     
Yep, this works fine and I have done it with two PC clones over a 2400
baud switched phone connection.  Actually had two FTP sessions and a
Telnet session going all at the same time.  Now if only the KA9Q soft-
ware would talk to my NI5210 card....  (hint, hint).
     
                                  Walter G. Horbert (Walt@Maine.Bitnet)
                                  University of Maine System
                                  Computing And Data Processing Services
                                  Orono, Maine  04469