Path: utzoo!utgpu!water!watmath!clyde!rutgers!cmcl2!brl-adm!brl-smoke!gwyn
From: gwyn@brl-smoke.ARPA (Doug Gwyn )
Newsgroups: comp.sys.apple
Subject: Re: Printing with the IIGS
Keywords: IIGS, CItoh 310, IIGS BASIC printing listings
Message-ID: <7101@brl-smoke.ARPA>
Date: 15 Jan 88 14:23:40 GMT
References: <945@cod.NOSC.MIL>
Reply-To: gwyn@brl.arpa (Doug Gwyn (VLD/VMB) <gwyn>)
Organization: Ballistic Research Lab (BRL), APG, MD.
Lines: 15

In article <945@cod.NOSC.MIL> rupp@cod.NOSC.MIL (William L. Rupp) writes:
>I have a IIGS (really an upgraded IIe) and a CItoh 310 dotg matrix
>printer connected to a parallel interface in slot 1.  I have chosen "your
>card" on the control panel.  I cannot get anything to print on the CItoh.

This really should work.

>A friend told me the other night that only the Imagewriter works with
>the IIGS.

No, more precisely most commercial software specifically for IIGS only
supports the ImageWriter II at present.  If it's just outputting ASCII
text to the serial port (as opposed to bitmaps), almost any serial
printer should work (you may need to disable DTR flow control and
perhaps enable XON/XOFF flow control).