Path: utzoo!mnetor!uunet!husc6!uwvax!geowhiz!scott
From: scott@geowhiz.UUCP (Scott Kempf)
Newsgroups: comp.sys.apple
Subject: Transwarp and TimeMaster (was Re: The Zip Chip scam)
Message-ID: <619@geowhiz.UUCP>
Date: 19 Jan 88 16:50:13 GMT
References: <8801150020.AA17848@tcgould.TN.CORNELL.EDU> <6495@drutx.ATT.COM>
Reply-To: scott@geowhiz.UUCP (Scott Kempf)
Distribution: na
Organization: UW Madison, Geology Dept.
Lines: 26

In article <6495@drutx.ATT.COM> dvac@drutx.ATT.COM (VachonD) writes:
>In article <8801150020.AA17848@tcgould.TN.CORNELL.EDU>, halp@TCGOULD.TN.CORNELL.EDU ("Bruce P. Halpern") writes:
>> RE: Transwarp
>> 
>> I assume you don't have one. There is no interference with peripherals. Dip 
>> switches on the card allow any peripherals that need to operate at 1 Mhz.
>
>Sorry Bruce....Not so.... I have a friend who runs a BBS with both a TimeMaster
>and Transwarp.  The problems is that these two cards can not live off the same
>bus together.  With both cards installed he gets I/O errors on his Hard Drive
>and funny things happen like hanging.  If he takes one card or the other out,
>it functions fine....
>Later -Dan Vachon-     !ucbvax!ihnp4!drutx!dvac

Maybe your friend doesn't have a good enought power supply to support all these
cards.  Does he have something other than these three.  He must have a com card.

					Scott

-- 
_______________________________________________________________________________
Scott Kempf                          Blue itself teaches us blue.  -Bill Ranson
MAIL:   1302 Rutledge St., Madison, WI  53703    PHONE:  (608) 255-6205  (home)
UUCP:   {seismo, topaz, harvard, ihnp4}!uwvax!geowhiz!scott
ARPA:   geowhiz!scott@spool.wisc.edu             PHONE:  (608) 262-6154  (work)
BITNET: scott%geowhiz.uucp%spool.wisc.edu@wiscvm.bitnet